Get pricing information for asbestos testing Seattle cost from 5 Microns Inc. Free estimates. Results within 24 Hours. Tested by Accredited lab.

425-440-8787. Call Us Now!

How to test for asbestos

Detection of asbestos in building materials requires collecting and examining small samples from 1 cubic inch to 3 square inches depending on the material sampled. The EPA recommends the number of samples collected per building material.

Asbestos survey work performed by 5 Microns Inc. meets regulatory inspection requirements enforced by federal, state, and local agencies, including Asbestos Hazard Emergency Response Act (AHERA), WAC 296-62-077 (WISHA) and 40 CFR Part 61 (NESHAP) and 29 CFR Part 1926.1101 (OSHA)

Our inspectors’ bags photograph, document each sample he collects, and completes’ a chain of custody form. The inspector will draw a map indicating where the samples were collected and return the samples with the chain of custody form to the lab for evaluation.

Results take anywhere from 24 hours to three business days to deliver to you. It takes anywhere from half an hour to three hours to complete an asbestos inspection of a home, the latter being a demolition inspection.

Asbestos testing cost

Residential Asbestos Testing Seattle Cost:

The asbestos service call is from $440, including four samples, a survey, and a complete report. Each additional sample is $37 per sample layer; each layer is considered a separate sample. *Please note: Additional sample layers can not be determined until the material is placed under a microscope in the lab. For example, drywall has several layers: the sheetrock,  surface texture, the tape, and the mud, totaling three samples; popcorn ceiling texture is usually just one sample layer. The information will be available in five business days. The final cost will be determined based on your location from our office. There will be payment options on the invoice for you to choose from. Our office will forward your report after we’ve received payment. You can check our availability and book an appointment here: https://5microns.tech/online-appointments/.

*Note: The collection of asbestos-containing material is regulated by the EPA, which dictates the number of samples we collect.

We also offer drop-off and mail-in asbestos testing. The cost is $37 per sample layer. *Note that each layer is considered a sample if classified as ACM–asbestos-containing material. Please carefully follow the instructions below to drop off or mail a sample.

Prices are subject to change without notice, and bids are valid for 30 days from receipt. Full reports included.

Timing for results:

Within 24 hours, if delivered to the lab by 3:00 PM. Same-day service is available. Call for a quote.

Payment:

We accept payment by check and major credit cards. After receiving payment, we will release your report.

Call 425-440-8787 Now! Complete the form below to schedule an appointment and get a quote from one of our experts today!

COMPLETE FOR AN ESTIMATE:

Asbestos testing near me

If you don’t feel comfortable collecting the drywall sample yourself, you can hire a consultant with an AHERA certification to handle the matter. The professional will be able to do things properly and could save you quite a bit of money in the process. Let the experts at 5 Microns Inc. assist you. Call 425-440-8787 Now!

Asbestos testing lab near me

Don’t know an asbestos lab in your area? Get online and search for “asbestos testing lab near me,” and you should get plenty of results, and don’t limit yourself to labs in your local area; there are plenty of accredited labs that accept mail-in asbestos testing. Ask them for their terms of service and pricing. You can also contact 5 Microns Inc. for asbestos testing. Call 425-440-8787 Now!

Asbestos testing lab

All your samples are now ready for testing, but who will do the testing part? An asbestos testing lab will perform the testing for the presence, type, and percentage of asbestos. The laboratory will utilize the Polarize Light Microscope or the Transmission Electron Microscope for analysis.

Mail-in asbestos testing

IMPORTANT-MUST READ FIRST: All mail-in samples must have a tracking number and include our asbestos chain of custody form to be processed. If the chain of custody form is missing, your piece (s) will not be accepted and processed. Drop-offs MUST have the COC form inside your package but not in the sample bag. DO NOT MAIL YOUR SAMPLES BY FIRST CLASS MAIL. Send your sample(s) via USPS Priority Mail, UPS, and FedEx. It is essential to closely follow these directions so our asbestos testing lab can promptly process your sample(s).

Where can I send a sample for asbestos testing?

www.5microns.tech/forms

*PLEASE NOTE FOR ALL DROP-OFFS: All samples must be dropped off at the back of the office building located at 7100 Fort Dent Way Tukwila WA outside the Tabor 100 Office and placed inside the black drop-box pictured below. Do not take your samples to the front desk. The front desk will not accept drop-offs over the counter, NO EXCEPTIONS

5 Microns Inc Sample Drop Box
5 Microns Inc. Sample Drop Box