Asbestos is deadly. Thousands of products made with asbestos are commonly found in many homes and buildings today. In fact, most structures in the United States built before 1980 contain products made with asbestos.
Asbestos Testing Near Me
- How to test for asbestos
- Asbestos testing cost
- Timing for results
- Payment
- Asbestos testing lab
- Asbestos testing near me
Asbestos testing. AHERA-certified consultants perform them. Free estimates. Results are available within 24 hours.
Don’t put yourself and your loved ones at risk of asbestos exposure, and save yourselves the trip to a lab; let our experts come to you and perform all the work. We have the right equipment, tools, and expertise to complete all the actions at an affordable price. Our job is guaranteed, and we provide a comprehensive service report.
How to test for asbestos
Detection of asbestos in building materials requires collecting and examining small samples from 1 cubic inch to 3 square inches depending on the material sampled. The EPA recommends the number of samples collected per building material.
Asbestos survey work performed by 5 Microns Inc. meets regulatory inspection requirements enforced by federal, state, and local agencies, including Asbestos Hazard Emergency Response Act (AHERA), WAC 296-62-077 (WISHA) and 40 CFR Part 61 (NESHAP) and 29 CFR Part 1926.1101 (OSHA)
Our inspector bags photograph, document each sample he collects and completes’ a chain of custody form. The inspector will draw a map indicating where the samples were collected and return the pieces with the chain of custody form to the lab for evaluation using Polarized Light Microscopy (PLM).
Results take two business days, and we offer next-day and same-day service. Our survey takes approximately half an hour to three hours for a multi-unit commercial asbestos inspection.
Asbestos testing cost
Residential Asbestos Testing Cost:
The asbestos service call is $369, including four samples, a survey, and a complete report. Each additional sample is $25 per sample layer; each layer is considered a separate sample. The cost to perform a demolition survey is $799, which includes up to twenty samples, and additional samples are $25 per sample layer. There may be a small one-way trip fee of $0.65/mile if your address is over 20mi from our office. You will be billed by email once the data is ready. The information will be available in two business days. There will be payment options on the invoice for you to choose from. Our office will forward your report after we’ve received payment. You can check our availability and book an appointment here: https://5microns.tech/online-appointments/.
The average cost for a home asbestos survey ranges from as little as $350-$550. *Note: the EPA dictates the number of samples we collect.
We also offer drop-off and mail-in asbestos testing. The cost is $26 per sample layer. *Note that each layer is considered a sample if classified as ACM–asbestos-containing material. Please carefully follow the instructions below to drop off or mail a sample.
Prices are subject to change without notice, and bids are valid for 30 days from receipt. Full reports included.
Timing for results
The standard turnaround time is two business days. We also offer 24 hour turnaround time if the samples arrive at the lab by 2 PM, and there is a $25 fee. Same-day service is available. Call for a quote.
Payment
We accept payment by check and major credit cards. A report is sent to you by email after payment is made. Please note that this process is not automatic.
Asbestos testing lab
We offer drop-off and mail-in asbestos testing services. The cost is $26 per sample layer. Please carefully follow the instructions below to drop off or mail a sample:
Instructions
*PLEASE NOTE FOR ALL DROP-OFFS: All samples must be dropped off at the back of the office building located at 7100 Fort Dent Way, Tukwila, WA, outside the Tabor 100 Office and placed inside our black drop-box. Do not take your samples to the front desk. The front desk will not accept drop-offs over the counter, NO EXCEPTIONS
Your sample must be placed in a separate bag, and the form must not touch the material, or the lab technicians will reject it. Make sure the paperwork and the samples are in one larger bag so that we can associate your pieces with the paperwork you filled out.
IMPORTANT-MUST READ FIRST: All mail-in samples must have a tracking number and include our asbestos chain of custody form to be processed. If you miss the chain of custody form, your piece (s) will not be accepted. Drop-offs MUST have the COC form inside your package but not in the sample bag. DO NOT MAIL YOUR SAMPLES BY FIRST CLASS MAIL. Send your sample(s) via USPS Priority Mail, UPS, and FedEx. It is essential to closely follow these directions so our asbestos testing lab can promptly process your sample(s).
Asbestos Testing Near Me
Call 425-440-8787 Now! or complete the form below to schedule an appointment and get a quote from one of our experts today!
5 Microns Inc. 7100 Fort Dent Way Ste. 100 Tukwila, WA 98188