Asbestos Testing in Kent, WA

When Is Asbestos Testing Required in Kent?

In Washington State, asbestos inspections are commonly required before:

• Demolition projects
• Renovation or tenant improvements
• Commercial build-outs
• Multi-family upgrades
• Real estate transactions and due diligence
• Public and school facilities (AHERA may apply)

Regulatory oversight may involve federal, state, and local requirements, including:

• AHERA
• WAC 296-62-077 (WISHA)
• 40 CFR Part 61 (NESHAP)
• OSHA 29 CFR 1926.1101

Failure to conduct proper inspection before disturbing suspect materials can result in project delays and potential penalties.

Common Asbestos-Containing Materials in Kent Properties

Many residential and commercial buildings in Kent built prior to the 1990s may contain asbestos in:

• Popcorn ceiling texture
• 9×9 or 12×12 vinyl floor tiles
• Black mastic adhesives
• Drywall joint compound
• Pipe insulation
• HVAC duct insulation
• Cement board siding (transite)
• Roofing materials

Kent’s mix of older industrial buildings, warehouse spaces, and residential neighborhoods makes pre-renovation asbestos testing especially common.

Asbestos cannot be confirmed visually. Laboratory analysis is required.

Our Asbestos Testing Process

1. On-Site Inspection

We visually assess suspect materials and determine appropriate sampling strategy.

2. Representative Sampling

Small samples are collected following EPA sampling guidance. The number of samples is determined by material type and regulatory recommendations.

3. Chain of Custody & Documentation

Each sample is documented, photographed, mapped, and logged on a formal chain-of-custody form.

4. Accredited Laboratory Analysis (PLM)

Samples are analyzed under Polarized Light Microscopy (PLM) to determine the presence, type, and percentage of asbestos.

5. Digital Report

You receive a clear report outlining:

• Sample locations
• Laboratory results
• Material classification
• Recommended next steps (if applicable)

Asbestos Testing Cost in Kent

Residential Asbestos Inspection – Starting at $440

Includes:

• Site visit
• Up to four samples
• Written report
• Survey documentation

Each additional sample is $37 per sample layer.

Important: Some materials contain multiple layers. Each layer is considered a separate sample if classified as asbestos-containing material (ACM). Final sample counts are confirmed after laboratory evaluation.

Turnaround:

• 24-hour results available if samples reach the lab by 3:00 PM
• Standard turnaround: 3–5 business days

Full reports are included.

Pricing is subject to change and may vary based on location and scope.

How is asbestos testing performed

Detection of asbestos in building materials requires collecting and examining small samples from 1 cubic inch to 3 square inches depending on the material sampled. The EPA recommends the number of samples collected per building material.

Asbestos survey work performed by 5 Microns Inc. meets regulatory inspection requirements enforced by federal, state, and local agencies, including Asbestos Hazard Emergency Response Act (AHERA), WAC 296-62-077 (WISHA) and 40 CFR Part 61 (NESHAP) and 29 CFR Part 1926.1101 (OSHA)

Our inspectors’ bags, photograph, document each sample he collects, and complete’ a chain of custody form. The inspector will draw a map indicating where the samples were collected; and will return the samples with the chain of custody form to the lab for evaluation.

Results take anywhere from 24 hours to three business days to deliver to you, and it takes anywhere from half an hour to three hours to complete an asbestos inspection of a home, the latter being a demolition inspection.

Timing for results:

Our standard turnaround time is 3-5 business days. Results are also available within 24 hours if delivered to the lab by 3:00 PM. Same-day service is available. Call for a quote.

Payment:

We accept payment by ACH and major credit cards. After receiving payment, we will release your report.

Call 425-440-8787 Now! or complete the form below to schedule an appointment and get a quote from one of our experts today!

Mail-In & Drop-Off Asbestos Testing

We also offer mail-in and drop-off asbestos testing at:

7100 Fort Dent Way #100

Tukwila, WA 98188

Cost: $37 per sample layer.

All mailed samples must:

• Include tracking
• Include completed chain-of-custody form
• Be sent via USPS Priority, UPS, or FedEx
• Not be sent First Class Mail

Improperly submitted samples cannot be processed.

*In addition to asbestos inspections, we also provide mold testing and indoor environmental assessments throughout Washington. Some renovation projects require both mold and asbestos evaluations depending on building conditions.

Mold testing in Seattle

Mold testing in Tacoma

Mold testing in Bellevue

Independent Testing — No Abatement Conflict

Because we do not perform asbestos removal, our findings are independent and objective.

This is especially important for:

• Contractors
• Property managers
• Real estate professionals
• Commercial property owners

Our role is testing, documentation, and compliance clarity.

Frequently Asked Questions

Is asbestos testing required before demolition in Kent?

Yes. Washington regulations typically require inspection before demolition or renovation where materials may be disturbed.

How many samples are required?

The number of samples depends on material type and regulatory guidance. The EPA recommends specific sample counts per homogeneous material.

How long do results take?

Results are often available within 24 hours. Standard turnaround is 1–3 business days.

What happens if asbestos is found?

If asbestos is confirmed, licensed abatement contractors can remove or manage the material in accordance with Washington State regulations.

Can I remove asbestos myself?

Washington State regulates asbestos handling. Improper removal can pose health risks and may violate regulations.

Serving Kent and Nearby Areas

We provide asbestos inspection services throughout:

• Renton
• Seattle
• SeaTac
• Federal Way
• Auburn
• Bellevue
• Greater King County

Schedule Asbestos Testing in Kent, WA

If you are planning renovation, demolition, or need asbestos testing for a property transaction in Kent, contact 5 Microns Inc. today.

Same-week scheduling may be available.

Asbestos Inspection Services Across Washington

5 Microns Inc. provides asbestos inspection and demolition survey services throughout Washington State. If your project is located outside this city, learn more about our statewide asbestos testing services in Washington.

statewide asbestos testing services in Washington

Statewide asbestos testing services in Washington

We provide asbestos inspection services throughout the Puget Sound region including:

Seattle | Tacoma | Bellevue | Everett | Renton | Kent | Lakewood | Puyallup | Lynnwood | Shoreline

COMPLETE FOR AN ESTIMATE: