Get pricing information for asbestos test cost from 5 Microns Inc. Free estimates. Results within 24 Hours. Tested by Accredited lab.
How do we collect asbestos samples?
Detection of asbestos in building materials requires collecting and examining small samples from 1 cubic inch to 3 square inches depending on the material sampled. The EPA recommends the number of samples collected per building material.
Asbestos survey work performed by 5 Microns Inc. meets regulatory inspection requirements enforced by federal, state, and local agencies, including Asbestos Hazard Emergency Response Act (AHERA), WAC 296-62-077 (WISHA) and 40 CFR Part 61 (NESHAP) and 29 CFR Part 1926.1101 (OSHA)
Our inspectors’ bag, photograph, document each sample he collects and completes’ a chain of custody form. The inspector will draw a map indicating where the samples were collected; and will return the samples with the chain of custody form to the lab for evaluation.
Results take anywhere from 24 hours to three business days to deliver to you, and it takes anywhere from half an hour to three hours to complete an asbestos inspection of a home, the latter being a demolition inspection.
What does asbestos testing cost?
Residential Asbestos Testing Cost:
Starting at $150 service call + trip fee if over 20 mi @ $0.60/mi + $25/sample collected and tested. The average cost for a home asbestos survey ranges from as little as $200-$550. *Note: the EPA dictates the number of samples we collect.
Commercial Asbestos Testing Cost:
Starting at $150 service call for one hour or less; and 100/hr for additional hour + trip fee if over 20 mi @ $0.60/mi + $25/sample collected and tested. *Note: the EPA dictates the number of samples we collect.
Prices are subject to change without notice, and bids are valid for 30 days from receipt. Full reports included.
Timing for results:
Within 24 hours if delivered to the lab by 3:00 PM. Same day service available. Call for a quote.
Payment:
We accept payment by check and major credit cards. After receiving payment, we will release your report.
Asbestos testing lab
If you need a quick test for asbestos, you can either drop-off or send a sample to test for asbestos to 5 Microns Inc. We offer mail-in asbestos testing with optional 3 hour turnaround times from receipt. And we can send you the result by email and give them to you over the phone or mail you a hard copy. Don’t hesitate to contact us if you have any questions regarding asbestos testing; we would be delighted to help you.
Where can I send a sample for asbestos testing?
Mail-in samples to the following address *at Tabor 100 co-working offices:
5 Microns Inc.
7100 Fort Dent Way #100
Tukwila, WA 98188
IMPORTANT-MUST READ FIRST: All mail-in samples must have a tracking number and include our asbestos chain of custody form to be processed. If the chain of custody form is missing, your sample(s) will not be accepted and processed. Drop-offs MUST have the COC form inside your package but not in the sample bag. DO NOT MAIL YOUR SAMPLES BY FIRST CLASS MAIL. Send your sample(s) via USPS Priority Mail, UPS, and FedEx. It is essential to closely follow these directions so our asbestos testing lab can promptly process your sample(s).
*PLEASE NOTE FOR ALL DROP-OFFS: All samples must be dropped off at the back of the office building located at 7100 Fort Dent Way Tukwila WA outside the Tabor 100 Office and placed inside the black drop-box pictured below. Do not take your samples to the front desk. The front desk will not accept drop-offs over the counter, NO EXCEPTIONS
Call 425-440-8787 Now! or complete the form below to schedule an appointment and get a quote from one of our experts today!
