Wildfire Ash and Soil Testing in Oregon

Wildfire ash can settle on yards, gardens, patios, decks, roofs, building entrances, agricultural areas, and other outdoor surfaces. Wind, rain, runoff, firefighting activities, debris removal, and routine property use may then move that material into surrounding soil or carry it into buildings.

5 Microns Inc. provides independent wildfire ash and soil testing throughout Oregon for residential, commercial, multifamily, agricultural, and industrial properties. Testing can help document selected metals, polycyclic aromatic hydrocarbons, combustion-related particles, and other incident-specific conditions.

Services may be appropriate following a nearby wildfire, structure loss, regional ashfall event, debris-removal operation, or disputed wildfire-cleanup project.

Independent Wildfire Ash and Soil Assessment

5 Microns Inc. is an independent environmental testing and consulting company. We do not provide wildfire debris removal, soil excavation, landscaping, smoke cleaning, demolition, reconstruction, or fire-origin-and-cause investigations.

Our role may include:

• Reviewing available wildfire and property information
• Assessing accessible exterior conditions
• Identifying potential ash-deposition and runoff patterns
• Developing a property-specific sampling strategy
• Collecting ash, surface, or soil samples
• Coordinating laboratory analysis
• Interpreting the findings
• Providing written documentation

Because 5 Microns Inc. does not profit from excavation, cleaning, debris removal, or reconstruction, our conclusions are not influenced by the amount of corrective work that may be recommended.

Why Wildfire Ash May Require Evaluation

Ash composition depends on the materials involved in the fire.

Wildland fires may burn:

• Trees and vegetation
• Soil organic matter
• Fences
• Utility poles
• Agricultural materials
• Outdoor structures

When wildfires enter developed areas, they may also burn:

• Homes
• Commercial buildings
• Vehicles
• Electronics
• Batteries
• Roofing and siding
• Paints and coatings
• Treated wood
• Machinery
• Stored fuels
• Household products
• Commercial inventory

As a result, ash from one wildfire may differ substantially from ash produced by another. Laboratory testing may help characterize selected samples when the materials involved or intended use of the property justify additional evaluation.

Wildfire Ash Is Not Distributed Evenly

Ash deposition may vary considerably across a property.

Distribution can be influenced by:

• Wind direction and speed
• Distance from the fire
• Topography
• Buildings and fences
• Trees and vegetation
• Roof drainage
• Rainfall
• Irrigation
• Surface texture
• Foot and vehicle traffic
• Cleanup activities
• Soil disturbance

A heavy deposit may occur in one location while a nearby area contains little visible ash. For that reason, a single sample may not represent an entire yard, commercial property, or agricultural area.

A representative sampling plan should account for the property layout and the questions the investigation is intended to answer.

When Wildfire Ash and Soil Testing May Be Appropriate

Testing may be considered when:

• Visible ash has settled across a property
• A nearby wildfire burned structures or vehicles
• Ash accumulated in a yard, garden, or play area
• Runoff carried ash into soil
• Debris removal occurred near the property
• Outdoor residue is being tracked indoors
• Agricultural land or animal-use areas may be affected
• Cleanup began before conditions were documented
• The extent of ash deposition is disputed
• Post-cleanup verification is requested
• An insurance claim requires independent documentation
• Property use decisions require additional information

Not every wildfire event requires the same laboratory analyses. The sampling plan should reflect the incident, suspected source materials, affected areas, and intended use of the findings.

What Wildfire Ash and Soil Testing Can Evaluate

Depending on the circumstances, testing may evaluate:

• Selected metals
• Polycyclic aromatic hydrocarbons
• Combustion-related particles
• Visible ash deposits
• Surface residue
• Soil in selected locations
• Comparison areas
• Conditions before cleanup
• Conditions after cleanup
• Runoff or drainage pathways
• Agricultural or commercial work areas
• Exterior areas near a damaged structure

Testing does not identify every possible substance produced by a wildfire unless it is specifically included in the analytical scope.

Ash Sampling

Ash samples may be collected from locations where deposited material is visibly present and can be collected without unnecessarily disturbing the area.

Potential sampling locations include:

• Patios and decks
• Outdoor furniture
• Window ledges
• Building entrances
• Roof-drainage discharge areas
• Driveways and walkways
• Vehicles or equipment
• Yards
• Gardens
• Areas near fire debris

Ash samples may be submitted for particle characterization, metals analysis, PAH analysis, or other incident-specific testing.

A collected ash sample represents the material present at that particular location. It should not automatically be assumed to represent all ash across a property or the wider wildfire area.

Soil Sampling After Wildfire Ash Deposition

Soil sampling may be appropriate when wildfire ash has mixed with surface soil or when runoff and property activities may have redistributed deposited material.

A soil-sampling plan may consider:

• Location of visible ash
• Proximity to burned structures
• Prevailing wind direction
• Drainage patterns
• Roof downspouts
• Low-lying areas
• Gardens and play areas
• Bare soil versus landscaped areas
• Vehicle and equipment routes
• Areas disturbed during cleanup
• Intended future use

Sample depth should be selected according to the investigation objective. A shallow surface-soil sample answers a different question from a deeper sample.

The report should identify the approximate depth and location of each soil sample so the results can be interpreted appropriately.

Discrete and Composite Soil Samples

Soil samples may be collected as discrete or composite samples, depending on the purpose of the investigation.

A discrete sample represents soil collected from one identified location. It may be useful for evaluating a specific ash deposit, drainage area, or suspected hotspot.

A composite sample combines material from multiple locations within a defined area. It may provide information about average conditions across that area but can dilute localized concentrations.

The appropriate approach depends on whether the investigation is intended to evaluate:

• A specific location
• A suspected hotspot
• An average condition
• A garden or play area
• A commercial work zone
• A larger outdoor property
• A comparison area

The sampling method should be documented so the laboratory results are not interpreted more broadly than the collection strategy supports.

Metals Testing in Wildfire Ash and Soil

Ash may contain metals originating from natural minerals and manufactured materials.

Potential sources include:

• Soil and vegetation
• Paints and coatings
• Roofing and siding
• Treated wood
• Vehicles
• Electronics
• Batteries
• Machinery
• Plumbing components
• Utility infrastructure
• Household products
• Commercial materials

Metals analysis may be appropriate when a wildfire burned developed areas or when the incident information identifies particular materials of concern.

The analytical panel should be selected according to the suspected sources. The same metals should not automatically be tested during every wildfire investigation.

PAH Testing in Ash and Soil

Polycyclic aromatic hydrocarbons, commonly called PAHs, may be produced during incomplete combustion.

PAH testing may be considered when:

• Petroleum products or fuels burned
• Vehicles were involved
• Structures and mixed contents burned
• Commercial or industrial materials were affected
• Heavy ash deposition occurred
• Runoff carried residue into soil
• Compound-specific documentation is needed

PAHs may also originate from traffic, fuel use, heating equipment, and other background sources. A detected compound does not automatically establish that it originated from the reported wildfire.

Results should be interpreted in relation to the sample location, property history, wildfire event, cleanup activities, and comparison findings.

Particle Analysis of Wildfire Ash

Microscopic analysis may help characterize particles collected from exterior or interior surfaces.

Samples may contain:

• Ash-like particles
• Char fragments
• Soot-like particles
• Plant material
• Soil
• Pollen
• Fibers
• Building debris
• Other environmental particles

Particle analysis may help determine whether collected material exhibits characteristics consistent with combustion residue. It does not necessarily identify every source material, establish when the particle was deposited, or prove that all similar particles originated from one wildfire.

Testing Yards and Residential Properties

Residential investigations may involve:

• Front and back yards
• Gardens
• Patios
• Decks
• Play areas
• Pet-use areas
• Driveways
• Walkways
• Attached garages
• Building entrances
• Roof-drainage areas
• Exterior HVAC components

Sampling should be designed around how the property is used and where ash was observed or likely to accumulate.

A sample from an isolated location should not automatically be applied to the entire residential property.

Gardens and Food-Growing Areas

Gardens may warrant special consideration because soil is intentionally disturbed and used for growing plants.

A garden-related assessment may consider:

• Visible ash deposition
• Whether produce was present during the event
• Soil disturbance after the event
• Irrigation and rainfall
• Raised beds versus native soil
• Imported soil or compost
• Proximity to burned structures
• Comparison locations
• Future garden use

Laboratory results should be interpreted according to the analytes tested and the intended use of the area.

Environmental testing does not replace medical, agricultural-extension, or food-safety advice when those services are needed.

Agricultural Properties

Wildfire ash may affect:

• Fields
• Orchards
• Vineyards
• Animal-use areas
• Barns
• Equipment yards
• Feed-storage areas
• Irrigation pathways
• Farm buildings
• Outdoor workspaces

Agricultural sampling plans should account for the size of the property, land use, wind direction, drainage, soil disturbance, and proximity to burned materials.

Large agricultural properties may require multiple sampling zones. A few samples cannot automatically characterize an entire farm or field.

Commercial and Industrial Properties

Commercial and industrial wildfire investigations may involve:

• Warehouses
• Outdoor storage
• Manufacturing properties
• Equipment yards
• Vehicle fleets
• Loading areas
• Commercial landscaping
• Employee work areas
• Stormwater pathways
• Adjacent undeveloped land
• Inventory stored outdoors

The sampling strategy should reflect the property’s operations, layout, materials, and intended use.

Testing may help document selected areas for insurance, operational, property-management, or remediation-planning purposes.

Ash Near Burned Structures and Vehicles

Ash produced by burned structures or vehicles may differ from ash produced primarily by vegetation.

Potential source materials include:

• Painted building components
• Roofing
• Siding
• Insulation
• Plastics
• Electronics
• Batteries
• Fuels and lubricants
• Tires
• Machinery
• Household contents
• Commercial products

When developed properties have burned, the sampling and analytical plan should consider the known or suspected materials involved.

5 Microns Inc. does not determine the origin or cause of the fire.

Runoff and Drainage Pathways

Rain, irrigation, and firefighting water may transport ash and debris.

Potential accumulation areas include:

• Roof downspouts
• Drainage swales
• Low points
• Ditches
• Storm-drain areas
• Eroded slopes
• Edges of paved surfaces
• Areas below burned structures
• Sediment deposits

Sampling may help document selected locations, but water movement can create irregular patterns. Conditions at a drainage point should not automatically be treated as representative of the entire property.

Runoff and Drainage Pathways

Rain, irrigation, and firefighting water may transport ash and debris.

Potential accumulation areas include:

• Roof downspouts
• Drainage swales
• Low points
• Ditches
• Storm-drain areas
• Eroded slopes
• Edges of paved surfaces
• Areas below burned structures
• Sediment deposits

Sampling may help document selected locations, but water movement can create irregular patterns. Conditions at a drainage point should not automatically be treated as representative of the entire property.

Exterior Ash Tracked Indoors

Outdoor ash may be carried indoors on:

• Shoes
• Clothing
• Pets
• Tools
• Vehicles
• Packages
• Outdoor furniture
• Cleanup equipment

Interior assessment may be appropriate when visible residue or suspected wildfire particles are found around entrances, garages, mudrooms, ventilation components, or other indoor areas.

Surface sampling can help evaluate selected deposits. Indoor findings should be interpreted in relation to outdoor conditions and normal household or commercial dust.

Sampling Before Cleanup

When practical, documentation and sampling should be considered before extensive ash removal, soil disturbance, landscaping, or pressure washing begins.

Pre-cleanup assessment may help document:

• Visible ash locations
• Deposition patterns
• Areas near burned structures
• Drainage pathways
• Suspected hotspots
• Comparison locations
• Conditions before disturbance
• A baseline for later evaluation

Necessary emergency and protective actions should not be delayed solely for testing.

Photographs, videos, cleanup records, debris-removal information, and documentation of disturbed areas should be retained whenever possible.

Post-Cleanup Ash and Soil Testing

Testing may also be performed after ash removal or soil cleanup.

A post-cleanup assessment may include:

• Review of the reported cleanup scope
• Visual observations
• Surface sampling
• Soil sampling
• Comparison sampling
• Evaluation of runoff areas
• Laboratory analysis relevant to the original event

Post-cleanup testing documents selected accessible conditions at the time of the assessment. It does not guarantee that every portion of soil or every concealed location is free of residue.

Whenever practical, post-cleanup expectations should be discussed before remediation begins.

Interpreting Ash and Soil Results

Laboratory results should be interpreted within the context of:

• Sampling method
• Sample location
• Sample depth
• Surface type
• Property history
• Materials involved in the wildfire
• Background sources
• Weather
• Cleanup activities
• Comparison areas
• Intended property use
• Investigation limitations

A result from one location does not automatically characterize an entire property.

When regulatory or health-based screening values are relevant, the applicable jurisdiction, land use, analyte, sample type, and purpose of the comparison should be clearly identified.

Wildfire Ash Testing for Insurance Claims

Independent testing may provide documentation when an insurance claim involves outdoor ash, soil, wildfire smoke, or disputed cleanup conditions.

A report may identify:

• Wildfire and property information provided
• Areas assessed
• Observed conditions
• Sampling methods
• Sample locations and depths
• Laboratory findings
• Professional interpretations
• Investigation limitations

5 Microns Inc. does not determine insurance coverage, liability, policy interpretation, or claim value.

Sample Identification and Chain of Custody

Samples submitted for laboratory analysis should be clearly identified.

Project records may include:

• Sample numbers
• Collection dates
• Sampling locations
• Approximate soil depths
• Sample types
• Requested analyses
• Collector information
• Transfer or shipment information
• Laboratory receipt

Chain-of-custody documentation supports sample identification and handling. It does not establish the source or significance of the material collected.

Our Wildfire Ash and Soil Testing Process

1. Initial Consultation

We gather information about the wildfire, property, visible ash, nearby burned materials, cleanup history, land use, and purpose of the investigation.

2. Sampling-Plan Development

A property-specific strategy is developed based on the affected areas, suspected source materials, drainage patterns, and questions requiring evaluation.

3. Property Assessment

The consultant documents accessible conditions, visible deposition, runoff pathways, disturbed areas, and proposed sampling locations.

4. Sample Collection

Representative ash, surface, or soil samples are collected from selected locations.

5. Laboratory Analysis

Samples are submitted to qualified laboratories for the requested analytical methods.

6. Written Documentation

The findings are organized into a report describing the assessment, sample locations, collection methods, laboratory results, interpretations, and limitations.

Wildfire Ash and Soil Testing Across Oregon

5 Microns Inc. provides independent wildfire ash and soil testing throughout Oregon. City-specific fire-testing information will be available for:

• Fire and Smoke Damage Testing Portland, OR
• Fire and Smoke Damage Testing Salem, OR
• Fire and Smoke Damage Testing Eugene, OR
• Fire and Smoke Damage Testing Bend, OR
• Fire and Smoke Damage Testing Medford, OR
• Fire and Smoke Damage Testing Gresham, OR
• Fire and Smoke Damage Testing Hillsboro, OR
• Fire and Smoke Damage Testing Beaverton, OR
• Fire and Smoke Damage Testing Springfield, OR
• Fire and Smoke Damage Testing Corvallis, OR
• Fire and Smoke Damage Testing Albany, OR
• Fire and Smoke Damage Testing Grants Pass, OR
• Fire and Smoke Damage Testing Ashland, OR
• Fire and Smoke Damage Testing Redmond, OR
• Fire and Smoke Damage Testing Lake Oswego, OR

Related Oregon Fire-Testing Services

Additional Oregon service information is available or planned for:

• Fire and Smoke Damage Testing Oregon
• Wildfire Smoke and Ash Testing Oregon
• Soot, Char, and Ash Testing Oregon
• Fire Damage Surface Testing Oregon
• Post-Remediation Fire Clearance Testing Oregon
• Fire Damage Testing for Insurance Claims Oregon
• Commercial Fire and Smoke Damage Testing Oregon

Frequently Asked Questions

What can wildfire ash contain?

Wildfire ash may contain mineral material, char, soil, vegetation residue, and particles from buildings, vehicles, electronics, coatings, machinery, or other materials involved in the fire.

Can wildfire ash be tested for metals?

Yes. Ash, surface, or soil samples may be analyzed for selected metals when the incident circumstances support that testing.

Can soil be tested after ash has settled?

Yes. Soil testing may be considered when ash has mixed with surface soil or been redistributed by runoff, cleanup, vehicles, or other activities.

Does one soil sample represent an entire yard?

Not necessarily. Ash and soil conditions may vary substantially across a property. Multiple samples or sampling zones may be needed.

What is the difference between a discrete and composite sample?

A discrete sample represents one identified location. A composite sample combines material from several locations to provide information about average conditions within a defined area.

Can you test a garden?

Yes. A garden-sampling strategy may consider visible ash, soil disturbance, irrigation, raised beds, proximity to burned structures, and intended future use.

Can you test agricultural land?

Yes. Sampling may be developed for selected fields, orchards, animal-use areas, equipment yards, or other agricultural locations. Large properties may require multiple sampling zones.

Should testing occur before ash cleanup?

When practical, pre-cleanup testing can document initial conditions and deposition patterns. Emergency and protective work should not be delayed solely for testing.

Can you test after cleanup?

Yes. Post-cleanup testing may document selected conditions after ash removal or soil remediation.

Do you perform ash cleanup or soil excavation?

No. 5 Microns Inc. provides independent assessment, sampling, laboratory coordination, and documentation. We do not perform debris removal, excavation, landscaping, or reconstruction.

Can testing assist with an insurance claim?

Testing can provide independent documentation of observed conditions and laboratory findings. It does not determine coverage, liability, policy interpretation, or claim value.

Does your testing determine whether soil is safe?

Testing provides information about the analytes included in the scope and the locations sampled. Interpretation must consider applicable criteria, land use, sampling methods, and investigation limitations.

Schedule Wildfire Ash and Soil Testing in Oregon

If wildfire ash, burned-building debris, runoff, or suspected fire-related residue has affected an Oregon property, 5 Microns Inc. can help develop an independent ash or soil-testing strategy.

Contact 5 Microns Inc. to discuss testing for a residential, commercial, multifamily, agricultural, or industrial property anywhere in Oregon.