While your flooring contractor was refinishing the beautiful wood flooring at your new house, he discovered mold after removing the baseboard from the drywall. The mold was green in color, and the same thing was found in every room in the house. You don’t know if you should spray it with an agent that will clean the mold, paint it or replace it.
The type of mold that grows on sheetrock tends to be toxic. There are three categories of mold: allergenic, which causes itchy, watery eyes, sneezing, runny nose, and coughing. Pathogenic mold causes respiratory problems, and toxigenic mold can produce mycotoxins, a protein inhibitor. Whenever you have visible mold on drywall, it is most likely unsalvageable and will need to be replaced. You will need to ascertain the source of the problem to stop it from happening again.
Home mold testing
You should obtain a sample of the visible mold using a cotton swab or a tape lift. As long as you follow the steps, there should be no problem getting the samples tested to find out what type of mold you have. There are kits that you can buy online or at a hardware store, including instructions.
Mold testing lab near me
Find a reliable mold testing lab to test the material for the presence, type, and spore count. Ask the laboratory if they are certified to test for mold. The lab may also be able to interpret the results and provide recommendations, but a professional mold inspector usually does that. Find a mold testing lab near you by typing in “mold testing lab near me” in your web browser.
Same-day mold testing
The average turnaround time for sample results is five business days. However, some labs may also offer same-day mold testing but will usually charge an expedited service fee for this service. Ask your lab for details.
Mold air testing
Additionally, you may want to test the air for non-visible mold spores, which can also be dangerous to your health. The air test can capture different colonies of spores. The airborne spores can be destroyed by fogging. You can rent the equipment and do the work yourself, but a trained technician best performs mold air tests.
Mold testing lab
Why not call the professionals at 5 Microns Inc for professional mold testing and inspection to assist you. You can also drop off or mail us samples to be tested for mold, asbestos, lead paint, and drinking water. Our hours of operation are from 8 AM to 5 PM Monday to Friday and Saturday from 9 AM to 3:30 PM. Please speak to one of our representatives today. Call 425-440-8787 Now!
Mail-in samples to the following address:
5 Microns Inc.
7100 Fort Dent Way #100
Tukwila, WA 98188
IMPORTANT-MUST READ FIRST: All mail-in samples must have a tracking number and include our general chain of custody form to be processed. If the chain of custody form is missing, your sample(s) will not be accepted and processed. Drop-offs MUST have the COC form inside your package but not in the sample bag. DO NOT MAIL YOUR SAMPLES BY FIRST CLASS MAIL. Send your sample(s) via USPS Priority Mail, UPS, and FedEx. It is essential to closely follow these directions so our asbestos testing lab can promptly process your sample(s).
*PLEASE NOTE FOR ALL DROP-OFFS: All samples must be dropped off at the back of the office building located at 7100 Fort Dent Way Tukwila, WA, outside the Tabor 100 Office and placed inside the black drop-box pictured below. Do not take your samples to the front desk. The front desk will not accept drop-offs over the counter, NO EXCEPTIONS!
